I started by cleaning up
the mold flash on the cars I am going to duplicate with an exacto knife and a jewelers
file. Then I sanded the bottoms of the cars on a flat surface.
"Masters" were looking good, I spray painted on a thin coat of Testors
Gloss Cote, to smooth out any rough details and fill any small bubble holes from
when they were made.
After the Gloss Cote had
dried a day I used Elmer's to glue the cars to a piece of styrene. Use only
enough glue so there is no air pockets under the cars.
the photo to advance to the next page